お久しぶりです。
色々、忙しくて更新が滞っていましたが、まぁ釣りだけはいってましたのでまとめて更新です。
誘われたのでアジングに初めていっていってきました。これが面白い
アジング向けのロッドを買うのと、ボートアジング向けにショートロッドが欲しくなり自作してしまいました
使用したものは下記のとおりです
品名
ブランクス
ジャストエースAMI632T【Tubular Model】
バット側を短く切って5.5ftにした
リールシート
B VSS KN16B
matagi EVAグリップ
EVSS16-RP24
内径11mm
リールシートスクリュー側専用ワインディングチェック
D16-FR
16-10.5カラーレッド
バットエンドパーツ
AEC-CAP27R
KNフード用カラーパターンカーボンパイプ
KN-16用 レッド
KNフード用カーボンパイプ専用トップリング
K-16CBTOP
レッド
KNフード用カーボンパイプ専用ボトムリング
K-16CBDOWN
レッド
ブランクはアジング向けのジャストエースでマグナムテーパーと呼んでいるティップからバットまで極端にラッパ状になったブランクです。これは6.3ftのチューブラです、これをボートアジング向けに5.5ftに短くしました。
ガイドはオールトルザイトで
品名
サイズ
個数
T-KLTG-H
12
1
T-KLTG-M
6
1
T-KLTG-L
5.5
1
T-KTTG
4
4
T-KGTT(F型)
4F-1.2
1
ガイドセッテイングはFUJIのガイドセッテイングを参考にアジング向けにトップガイドから
5.5cm
6.5cm
7.5cm
9.0cm
14.5cm
23.0cm
31.0cm
としました
グリップ周りはこんな感じです


赤を基調としたメタルパーツ

仮止めしてベンドカーブをチェック

仮止めして実釣


仮止めでの15cmのヒネハゼ
仮止めで釣りをしたところ問題がなく15cmのヒネハゼもつれたのでガイドセッテイングはOKとしました。
で完成したところでまずはハゼ実釣です





ヒネもゲット(15cm)






まぁ問題なさそうです。
これでアジングの実釣にいけます
でアジングの成果は、赤潮が出ていて、かなり厳しい状況でしたが

3名で50匹弱

外道で45cmの黒鯛も

結果、アジングでしっかりアタリがとれました。また04号(2.2lb)のラインでヒヤヒヤものでしたがバットがしっかりしたブランクで45cmの黒鯛も釣れよいロッドのテストになりました。
でアジングの翌週は
江戸川放水路でハゼクラ部のオフ会に参加しました
いやー渋かった、魚の居場所が見つからずオフ会のトーナメントはノーフィッシュでした
まぁ1匹つれたですが、写真のとおりあまりに釣れずリリースしました。

今回はロブルアーさん、ムカイさん、リライトさん協賛のイベントでした。

ハゼクラのイワシンさんと吉田さん

エリアトラウトでも有名はマックス田中さん
詳しくはロブルアーのブログでどうぞ
で今週までの成果をとりあえず貼っときます
ニューロッドとしてヤマガブランクスのブルーカレントのベイトモデルを買ったので

コイツを買いました

ブルカレ入魂

チチブも


ブルカレでも初ヒネハゼ14cm
で今週の成果は土曜、日曜はアジングロッドの調子を見るため2日ともアジングロッドでトライしました
土曜日は午後4時からの釣行ですが、なんと雨まじりの天気、雨が強いとアタリはなく雨が弱くなるとアタリがでるといった感じでしたがヒネもでてまぁまぁな感じでしたが、6時前に雷がなりだしたので退散しました

まずはトレモ


とんにかくトレモ釣れますIWASHIN SP3のラトル入りで15cm




で次の日曜日も3時から6時までの釣行です、どうしてもマイクロスプーンで釣りたかったのでまずはマイクロスプーンで



アジングロッドはエキストラファーストテーパで極端な先調子、マイクロスプーンで掛けるつりには、いい感じです、ただクランクでは弾く感じでバラシが若干多くなるかんじでした。やはりクランクはファーストからレギュラーよりの調子のほうがやりやすいです。
クランク向けにもう一本竿つくろうかなぁ



ザンムMR28でヒネさん15cm
一通りスプーンでの釣りの後はクランクですがザンムのMR28がめちゃくちゃ良かったですもうアタリまくりで深場に投げるとヒネの15cmまで釣れこの日のMVPでしたねー
これでラトルが入っていたら無敵なんですが
ということで更新が滞っておりましたが釣りは順調にこなしていました(^o^)
更新頻度が下がらないようにがんばりたいと思いますが、なにぶん面倒くさがりのため、なにとぞ生暖かく見守ってください 。
It's been a while.
I've been busy and haven't updated in a while, but I have been fishing, so here's a catch-up post.
A friend invited me to go 'Ajing' (horse mackerel fishing) for the first time, and it was a lot of fun.
I was thinking of buying a rod for Ajing, but I also wanted a short rod for boat Ajing, so I ended up building one myself.
Here are the parts I used:
Item Name
Blank
Justace AMI632T【Tubular Model】
I cut the butt end to shorten it to 5.5ft
Reel Seat
B VSS KN16B
Matagi EVA Grip
EVSS16-RP24
Inner Diameter 11mm
Winding Check for Reel Seat Screw
D16-FR
16-10.5 Color Red
Butt End Part
AEC-CAP27R
Color Pattern Carbon Pipe for KN Hood
KN-16 Red
Top Ring for KN Hood Carbon Pipe
K-16CBTOP
Red
Bottom Ring for KN Hood Carbon Pipe
K-16CBDOWN
Red
The blank is a Justace model for Ajing, which they call a 'magnum taper'—it's a blank that flares out extremely from the tip to the butt. It's a 6.3ft tubular blank, which I shortened to 5.5ft for boat Ajing.
The guides are all Torzite.
Item Name
Size
Quantity
T-KLTG-H
12
1
T-KLTG-M
6
1
T-KLTG-L
5.5
1
T-KTTG
4
4
T-KGTT(F type)
4F-1.2
1
I based the guide settings on Fuji's recommendations for Ajing. Starting from the tip-top, the spacing is:
5.5cm
6.5cm
7.5cm
9.0cm
14.5cm
23.0cm
31.0cm
Here's what the grip area looks like:


Metal parts with a red theme.

Temporarily taped to check the bend curve.

Test fishing with the guides temporarily taped.


A 15cm 'hinehaze' (mature goby) caught during the test.
The test fishing with the temporary setup went well, and I even caught a 15cm 'hinehaze' (mature goby), so I decided the guide settings were good to go.
With the rod completed, it was time to test it out by fishing for goby.





Got a mature goby too (15cm).






Well, it seems to work without any issues.
Now I can take it for some real Ajing.
As for the Ajing results, there was a red tide, making for some tough conditions, but...

Almost 50 fish among the three of us.

Also caught a 45cm black porgy as bycatch.

In the end, I was able to detect bites clearly while Ajing. I was a bit nervous using a #0.4 (2.2lb) line, but the blank has a strong butt section, and I even managed to land a 45cm black porgy, which made for a great test of the rod.
The week after the Ajing trip, I participated in an offline meetup for the 'Hazekura Club' at the Edogawa Drainage Channel.
Man, the fishing was tough. I couldn't find where the fish were, and I ended up with a 'no-fish' result in the meetup's tournament.
Well, I did catch one, but as the photo shows, the bite was so slow that I just released it.

This event was sponsored by Rob Lure, Mukai, and Rewrite.

Mr. Iwashin and Mr. Yoshida of Hazekura.

Max Tanaka, famous in area trout fishing as well.
For more details, please check out the Rob Lure blog.
Anyway, I'll post my catches from up to this week.
I bought a new rod, the baitcasting model of the Yamaga Blanks BlueCurrent.

I bought this one.

Breaking in the BlueCurrent.

A sculpin too.


First mature goby with the BlueCurre, 14cm.
As for this week's results, I spent both Saturday and Sunday trying out the new Ajing rod to see how it performs.
On Saturday, I started fishing from 4 PM, but the weather was rainy. When the rain was heavy, there were no bites, but when it lightened up, I started getting them. I even caught some mature gobies, so it was pretty decent, but I had to leave before 6 PM because of thunder.

First with a Tremo.


Anyway, the Tremo really catches fish. A 15cm one on the rattling IWASHIN SP3.




Then on Sunday, I fished again from 3 to 6 PM. I really wanted to catch one on a micro spoon, so I started with that.



The Ajing rod has an extra-fast taper, making it extremely tip-action. It feels great for setting the hook with micro spoons. However, with crankbaits, it tends to knock them away, leading to a few more lost fish. A rod with a fast to regular action is definitely better for cranking.
Maybe I should build another rod just for crankbaits...



A 15cm mature goby on a ZANMU MR28.
After fishing with spoons for a while, I switched to crankbaits, and the ZANMU MR28 was incredible. I was getting bites constantly, and by casting into the deeper spots, I even caught a 15cm mature goby. It was definitely the MVP lure of the day.
If only it had a rattle, it would be unstoppable.
So, even though my updates have been lagging, my fishing has been going well (^o^)
I'll try my best not to let my update frequency drop, but I'm naturally lazy, so please bear with me.
0 件のコメント:
コメントを投稿